Wireless Access Point User Guide
36
Advanced Settings
Clicking the Advanced Settings link on the Wireless menu will result in a screen like the fol-
lowing.
Figure 23: Advanced Settings
Data - Advanced Settings Screen
Enable this setting if you wish to use this mode, and your Wire-
less stations support this mode.
Check this to enable WMM (Wi-Fi Multimedia) support in the
Access Point. If WMM is also supported by your wireless
clients, voice and multimedia traffic will be given a higher
priority than other traffic.
If enabled, then WMM acknowledgement is disabled. Depend-
ing on the environment, disabling acknowledgement may
increase throughput slightly.
This determines how quickly a Wireless Station will be consi-
dered "Disassociated" with this AP, when no traffic is received.
Enter the desired time period.
Enter the preferred setting between 256 and 2346. Normally,
this can be left at the default value.
Enter the preferred setting between 20 and 1000. Normally, this
can be left at the default value.
Enter the preferred setting between 256 and 2346. Normally,
this can be left at the default value.
Select the desired option. The default is "Long". The "Short"
setting takes less time when used in a good environment.
To Next Page
Loading...
Need help?
General
