TRENDnet TEW-636APB User Manual

PC and Server Configuration
57
Using 802.1x Mode (without WPA)
This is very similar to using WPA-Enterprise.
The only difference is that on your client, you must NOT enable the setting The key is provided
for me automatically.
Instead, you must enter the WEP key manually, ensuring it matches the WEP key used on the
Access Point.
Figure 50: Properties Screen
Note:
On some systems, the "64 bit" WEP key is shown as "40 bit" and the "128 bit" WEP key is
shown as "104 bit". This difference arises because the key input by the user is 24 bits less than
the key size used for encryption.

TRENDnet TEW-636APB Specifications

General

Frequency Band	2.4 GHz
Maximum Wireless Speed	300 Mbps
Antennas	2
Ports	1 x 10/100 Mbps Ethernet
Power over Ethernet (PoE)	No
Wireless Standards	IEEE 802.11n
Wireless Security	WPA, WPA2, WEP
Operating Modes	Access Point, WDS
Power Supply	5V DC