Access Point Setup
19
Virtual AP Screen
This screen is displayed when you select a VAP on the Virtual AP Settings screen, and click the
Configure button.
Figure 10: Virtual AP Screen
VAP Data
Enter the desired settings for each of the following:
Enter a suitable name for this VAP.
Enter the desired SSID. Each VAP must have a unique SSID.
If Disabled, no SSID is broadcast.
If enabled, the SSID will then be broadcast to all Wireless Stations.
Stations which have no SSID (or a "null" value) can then adopt the
correct SSID for connections to this Access Point.
If enabled, then each Wireless station using the Access Point is
invisible to other Wireless stations. In most business stations, this
setting should be Disabled.
Enter the desired VLAN ID, as used on your network. IDs must be
in the range 1 ~ 4095. These IDs must match the IDs used by other
network devices.
Security Settings
Select the desired option, and then enter the settings for the selected method.
The available options are:
• None - No security is used. Anyone using the correct SSID can connect to your network.
• WEP - The 802.11b standard. Data is encrypted before transmission, but the encryption
system is not very strong.
To Next Page
Loading...
Need help?
General
