Non-PoE
TI-G642i
Front View
• Ports 1-4 – Designed to operate at 10Mbps, 100Mbps, or Gigabit speed in both
half-duplex and full-duplex transfer modes. Supports Auto MDI-X.
• SFP Slot 5-6 – Designed to operate at Gigabit speeds.
• Reset Button – Push the button for 3 seconds and release to reset to factory
defaults.
• Grounding point/screw – The switch chassis can also be connected to a known
ground point for additional safety and protection. (grounding wire not
included)
To Next Page
Loading...
