TRENDnet TI-RG262i - SNMP Trap

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
129
Network ID of
Trusted Host
Type the IP address of the remote SNMP management station in
dotted decimal notation, for example 192.168.1.0.
Mask
Type the subnet mask for the IP address of the remote SNMP
management station in dotted decimal notation, for example
255.255.255.0.
Apply
Click Apply to configure the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Community Name List
No.
This field indicates the community number. It is used for
identification only. Click on the individual community number to
edit the community settings.
Community
String
This field displays the SNMP community string. An SNMP
community string is a text string that acts as a password.
Right
This field displays the community string’s rights. This will be Read
Only or Read Write.
Network ID of
Trusted Host
This field displays the IP address of the remote SNMP
management station after it has been modified by the subnet
mask.
Subnet Mask
This field displays the subnet mask for the IP address of the
remote SNMP management station.
Action
Click Delete to remove a specific Community String.
SNMP Trap
Web Configuration
Management > SNMP > SNMP Trap
Parameter
Description
IP Address
Enter the IP address of the remote trap station in dotted decimal
notation.
Version
Select the version of the Simple Network Management Protocol
to use. v1 or v2c.
Community
String
Specify the community string used with this remote trap station.
Apply
Click Apply to configure the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Trap Receiver List
No.
This field displays the index number of the trap receiver entry.
Click the number to modify the entry.
IP Address
This field displays the IP address of the remote trap station.
Version
This field displays the version of Simple Network Management
Protocol in use. v1 or v2c.