© Copyright 2018 TRENDnet. All Rights Reserved.
Managed Industrial L2 Switch
System Information
CLI Configuration
This command displays the system’s network
name.
This command displays the current Eth0
configurations.
This command displays the system information.
This command displays the current operating
configurations.
This command displays the system’s CPU loading
and memory information.
This command displays the system up time.
Web Configuration
System Status > System Information
This field displays the model name of the Switch.
This field displays the name of the Switch.
This field displays the boot code version.
This field displays the firmware version.
This field displays the built date of the firmware.
This field displays whether the DHCP client is enabled on the
Switch.
This field indicates the IP address of the Switch.
This field indicates the subnet mask of the Switch.
This field indicates the default gateway of the Switch.
This field displays the MAC (Media Access Control) address of the
Switch.
The serial number assigned by manufacture for identification of
the unit.
This field displays the VLAN ID that is used for the Switch
management purposes.
This field displays the percentage of your Switch’s system load.
This field displays the total memory the Switch has and the
memory which is currently available (Free) and occupied
(Usage).
This field displays current date (yyyy-mm-dd) and time
(hh:mm:ss).
Click this to update the information in this screen.