TI-PG102i / TI-PG102i-M
Front View
• PoE+ Ports 1-8 – Designed to operate at 10Mbps, 100Mbps, or Gigabit speed in
both half-duplex and full-duplex transfer modes while simultaneously providing
power to supported PoE devices. Supports Auto MDI-X.
• SFP Slot 9-10 – Designed to operate at Gigabit or 100Mbps speeds.
• Reset Button – Push the button for 5-10 seconds and release to reset.
• Grounding point/screw – The switch chassis can also be connected to a known
ground point for additional safety and protection. (grounding wire not
included)
To Next Page
Loading...
