TRENDnet TI-RG262i - Technical Specifications; TI-Pg102 I; TI-G642 I; Ti-G160 Ws

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
144
Technical Specifications
TI-G642i
(v1.xR)
TI-G102i
(v1.xR)
TI-G160WS / TI-G160i
(v1.xR)
TI-RG262i (v1.0R)
TI-RP262i (v1.xR)
TI-PG541i (v1.xR)
TI-PG102i
(v1.xR)
TI-PG102i-M
(v1.xR)
Device
Interface
LED indicators and reset button
4 x Gigabit
ports
8 x Gigabit
ports
16 x Gigabit ports
24 x Gigabit ports
24 x Gigabit PoE+ ports
4 x Gigabit PoE+ ports
8 x Gigabit PoE+ ports
2 x Gigabit SFP slots
2 x SFP slots
1 x Gigabit port
2 x Gigabit SFP slots
1 x Gigabit SFP slot
DIP switches (DIN Rail only) and LED Mode select button (PoE only)
Data Transfer
Rate
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit Ethernet: 2000 Mbps (full duplex)
1G SFP: 2000 Mbps (full duplex)
Switch fabric
12 Gbps
20 Gbps
32 Gbps
52 Gbps
12 Gbps
20 Gbps
RAM buffer
128 MB
512 KB
128 MB
MAC Address
Table
8K entries
Jumbo
Frames
10 Kbytes
Forwarding
18.9 Mpps
(64-byte
packet size)
14.88 Mpps
(64-byte
packet size)
23.8 Mpps (64-byte packet
size)
38.7 Mpps (64-byte packet size)
8.93 Mpps (64-byte
packet size)
14.88 Mpps
(64-byte
packet size)
HOL Blocking
Prevention
HOL Blocking Prevention supported on all models
Power Input
External
power supply
(20 - 60V DC)
External power supply (12 - 60V DC)
External power supply (48 - 57V DC)
External power supply (24 - 57V DC)
Power
Consumption
12 W (max.)
13 W (max.)
12 W (max.)
20 W (max.)
705 W (max.)
130 W (max.)
253 W (max.)
PoE Type
N/A
802.3at: Up to 30 W per port
PoE Budget
N/A
685 W
120 W
240 W/48V, 124 W/24V