TRENDnet TI-RG262i - Page 37

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
34
eth0
management host
A.B.C.D
The command adds a management host address.
eth0
no management host
A.B.C.D
The command deletes a management host
address.
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#interface eth0
[DEVICE_NAME](config-if)#management host 192.168.200.106
Web Configuration
Basic Settings > General Settings > Management Host
Parameter
Description
Management
Host
This field configures the management host.
Apply
Click this button to take effect the settings.
Refresh
Click this button to begin configuring this screen afresh.
Management Host List
No.
This field displays a sequential number for each management
host.
Management
Host
This field displays the management host.
Action
Click the Delete button to remove the specified entry.