© Copyright 2018 TRENDnet. All Rights Reserved.
Managed Industrial L2 Switch
Web Configuration
Advanced Settings > PoE > Configuration
Selects the PoE mode, classification or consumption.
Classification - Allocated power according to class (0 to 4).
Consumption - Allocated power according to the actual need of
each PD.
Selects a port or a range of ports that you want to configure
the PoE function.
Selects Enable to enable the PoE function on the specific port.
Selects Disable to disable the PoE function on the specific port.
Selects Critical / High / Low priority for the specific port.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
Displays the current PoE mode.
Displays the total power that the Switch supports.
Displays the total consuming power for all of the PDs.
Displays the status of the external power module.
Displays the PoE state for the specific port.
Displays the PoE priority for the specific port.
The field displays the class mode which the PSE negotiate with
the PD on the specific port.
Displays the consuming power for the specific port.
Displays the power allocated for the specific port.
Displays the current status for the specific port.