Trianco Greenflame - 6.3 Filling with Fuel; 7. Boiler Handling

Greenflame Wood Pellet Boiler 15kW
16
Never allow any foreign material to enter the hopper. This
will lead to the malfunction of the auger system and could
cause damage to the appliance and invalidate your
warranty.
Always close the lid to the hopper once it has been filled
with pellets.
Never leave the hopper lid open for prolonged periods as
rain or moisture can affect the pellet.
Always supervise children when the hopper lid is open in
case foreign material is placed into the hopper or children
climb into the hopper.
7. Boiler Handling
One of the key features of the Greenflame 15 is its size and
ability to be transported to and located in confined spaces.
Care should also be exercised when manoeuvring the
appliance into position. The illustration below indicates the
weight distribution of the appliance.
Always protect the appliance when transporting on trolleys
or hand carts.
Only persons who have been trained in manual handling
techniques should attempt to move the appliance.
Incorrect lifting techniques can cause serious injury.
Unscrew locking nuts
Carefully remove secondary
ash pan and dispose of ash
into a metal container.
6.3 Filling with Fuel
The boiler will indicate when the level of pellets reaches a
low level. The system will shut down and will wait for the
hopper to be refilled.
Open the pellet hopper lid and carefully pour approved
pellets into the hopper.
Never fill the hopper above the guard mesh across the
opening of the hopper.
Total Dry Weight = 160kg
2/3 dry weight in this area.