Triggertrap Mobile App Manual | Page 4
Introduction
Triggertrap Mobile is an app that runs on your iOS device.
It enables you to use a number of dierent triggering
modes to trigger your camera.
You can use Triggertrap Mobile with either the internal
camera on your iOS device, or a compatible camera
connected via the Triggertrap Mobile Dongle.
Compatible Devices
Triggertrap Mobile for iOS is compatible with all devices
capable of running iOS 6.1 or newer, including iPhones,
iPod Touches, and iPads.
While the app will run on iPhone 3GS, we strongly
recommend using an iPhone 4S or newer with
Triggertrap Mobile, as this gives the best results and the
fastest triggering.
Using Triggertrap Mobile on an iPad
You can use Triggertrap Mobile on an iPad or iPod Touch,
but please be aware that these devices do not support all
features of Triggertrap Mobile, as not all of them have the
sensors required to operate all modes.
For example: some iPad and iPod touch models do not
have a built-in GPS chip, which means that the
DistanceLapse mode may not be available.
DID YOU KNOW?
You can always get the most recent version of Triggertrap
Mobile on the App Store – just point your browser at
http://tri.gg/ttm
To Next Page
Loading...