Keypad Operation and Features (36444-03)
— Section 3
The keypad can store one authority code and four access codes.
The authority code is used to create access codes
The access codes are used to unlock the vehicle
This allows for the owner to have one code and make separate
codes for someone else.
Default access code:
Default authority code:
Note: If it has been changed and you don’t know what it is, please go
to the Teaching Keypad New Authority / Access Codes section.
Standard Operation
Note: The dome light will turn on for 30 seconds upon any button press.
Locking
Press and hold the1 button for 2 seconds will lock entrance doors and
bay/compartment doors.
Unlock the Entrance Door
Put in a valid 5-digit access code (double beep from keypad) followed
by Button 1.
Unlock All Doors
Put in a valid 5-digit access code (double beep from keypad) followed
by Button 2.
Unlock Bay/Cargo Doors
Put in a valid 5-digit access code (double beep from keypad) followed
by Button 3.
11
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
Button 4
Button 4 Button 4 Button 4 Button 4
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
Button 1 Button 2 Button 3 Button 4 Button 4
36444-03
To Next Page
Loading...