12
3. Choose a location to store this code
a. Button 1 = Location 1
b. Button 2 = Location 2
c. Button 3 = Location 3
d. Button 4 = Location 4
4. Enter the desired 5-digit code in twice.
5. Test by unlocking the entry door.
Note: You may store up to 4 codes in the system. You may write over
a location by simply programming an access code over that location.
Keypad Wiring
Wire Color Wire Function
Red 12 Volt battery power
Black Ground
White
CAN High (communication line)
Green
CAN Low (communication line)
To Next Page
Loading...
