Infinity – Operational Manual
19
For dual source display
Run Mode Descriptions
EBKWH=150.05 The first display shows active / apparent
energy for Electricity Board Supply
Source.
TEB=000000:40:01 The second display shows the time
taken for energy Consumption of
EBKWh/EBKVAh if "LoadRunHr" is
selected in programming mode. If
"RunHr" is selected then it shows meter
powered on time.
DGKWH=105.10 The third display shows active /
apparent energy for Diesel Generator.
TDG=000000:60:01 The Fourth display shows the time
taken for energy Consumption of
DGKWh/DGKVAh if "LoadRunHr" is
selected in programming mode. If
"RunHr" is selected then it shows meter
powered on time.
TOT=255.15 The fifth display show total energy
consumption of both EB and DG.
OR EBKVAh=210.07
OR DGKVAh=210.07
To Next Page
Loading...
