Triotech Storm VR - HTC VR Calibration

Storm-OM-001 -
Storm-OM-001
52
28 February 2020
This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
11.1 HTC VR calibration
Steam VR configuration should be performed every time a VR Helmet needs calibration.
Make sure that Vive Light Houses (Base Stations) are connected.
1. Place Headset is placed on the calibration plate.
The headset needs to fit in between the guides on the calibration plate. To do
so the horizontal visual adjust may need to be retracted using the button on
the left side under the VR Helmet.