20
9. KVM Operation
9.1 Local Console
9.1.1 Local Console Login
When accessing the console KVM switch for the first time, a prompt will appear asking for a username and password. The
default username is administrator, and the default password is password. For security purposes, changing the username and
password on this account is strongly recommended. Once the KVM has been set up and user accounts have been created,
the login prompt will appear only when a user logs out of the KVM. After logging in for the first time using the default username
and password, the OSD Main Screen will appear in Administrator mode, with access to all settings and functions.
9.1.2 Local Console OSD Hotkey Sequence
Once logged into the KVM switch and a connected computer, use the local console OSD Hotkey sequence to re-open the OSD
Main Menu. The default hotkey sequence is [Scroll Lock, Scroll Lock], but other options include [Ctrl, Ctrl].
Note: When using the [Scroll Lock, Scroll Lock] OSD Hotkey sequence, hold down the [Fn] key, as the [Scroll Lock] key is part of the [Num
Lock] key.
To Next Page
Loading...
Need help?
General
