30
10. Keyboard Port Operation
10.1.10 Restore Default Values
This administrator-only hotkey restores the Console KVM Switch’s default values. See RESTORE DEFAULT VALUES. To restore
the default values, key in the following hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [R].
3. Press [Enter].
Once [Enter] is pressed, the command line displays RESET TO DEFAULT SETTING for three seconds; then the message
disappears and the KVM switch automatically exits Hotkey mode.
10.2 Hotkey Summary Table
HSM Mode
[Num Lock] + [-]
or
[Ctrl] + [F12]
[PN] [Enter] Switches KVM, Audio and USB focus directly to the computer that
corresponds to that port ID. (PN = port number)
[A] [Enter] Starts Auto Scan. The KVM focus cycles from port to port at the default
5-second intervals.
[A] [n] [Enter] Starts Auto Scan at n-second intervals (n = 1–255 seconds).
[H] Toggles between the default ([Num Lock] [-]) and alternate ([Ctrl] [F12])
Hotkey Settings Mode invocation keys.
[T] Toggles the OSD Hotkey between [Ctrl] [Ctrl] and [Scroll Lock] [Scroll Lock].
[F1] Set the port OS to Windows.
[F2] Set the port OS to Mac.
[F3] Set the port OS to Sun.
[F5] Performs a keyboard / mouse reset on the target computer.
[B] Enables / Disables the buzzer.
[R] [Enter] [R] [Enter] Resets hotkey settings to their default values. See RESTORE
DEFAULT VALUES for details
[←] Skips to the previous computer on the list, in Skip Mode.
[←] Skips to the next computer on the list in, Skip Mode.
[ESC] or [Spacebar] Exits Hotkey Settings Mode.
To Next Page
Loading...
