Fig. 2.
To
adjust
the
valve
operating
mechanism
Exhaust
valves
Having adjusted the inlet valves proceed to the exhaust valves which are
situated at the front of the engine. Proceed
in
the same way as for
the
inlet valves and position one valve
fu
ll
y op
en
wh
ilst you check the clear-
ance on the other.
In
this case
th
e clearance
is
O.006in.
Check
that the inspection cover gaskets are in good condition and
replace the covers making sure that the bolts are tightened evenly.
14
To Next Page
Loading...
