WHEELS
The wheel bearings are sealed
an
d require no maintenance.
To remove the front wheel
Unscrew the eight fork cap nuts and remove both caps and withdraw the
front
wheel. Do not apply the front brake while the wheel is out of the
forks. To
replace the wheel engage the disc between the brake pads
in
the caliper and replace the fork caps tightening the four nuts of the left
hand fork leg before finally tightening the right hand leg. This will enable
the spindle to align correctly with the left fork' leg. The front wheel hub
bearings are of the
non-adjustable ball journal type.
24
To Next Page
Loading...
