Triumph Tiger 800 - Ignition Switch;Steering Lock

38
General Information
Ignition Switch/Steering Lock
1. Ignition switch/steering lock
2. LOCK position
3. OFF position
4. ON position
5. PARK position
Ignition Switch Positions
This is a four position, key operated switch.
The key can be removed from the switch
only when it is in the OFF, LOCK or P (PARK)
position.
TO LOCK: Turn the handlebar to the left until
the arrow on the upper yoke aligns with the
ignition key.
1. Arrow on upper yoke
2. Ignition key
Turn the key to the OFF position, push and
fully release the key, then rotate it to the
LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering will
remain locked, and the position lights will be
switched on.
Note:
• Do not leave the steering lock in the
P position for long periods of time as
this will cause the battery to
discharge.
P
U
S
H
P
O
F
F
O
N
3
2
5
1
4
1
2
cgil