39
General Information
Brake Lever Adjuster
1. Adjuster wheel
2. Triangular mark
An adjuster is fitted to the front brake lever.
The adjuster allows the distance from the
handlebar to the lever to be changed to one
of four positions, to suit the span of the
operator's hands.
To adjust the lever, push the lever forward
and turn the adjuster wheel to align one of
the numbered positions with the triangular
mark on the lever holder.
The distance from the handlebar grip to the
released lever is shortest when set to number
four, and longest when set to number one.
For reasons of security and safety, always
move the ignition switch to the OFF
position and remove the key when leaving
the motorcycle unattended.
Any unauthorised use of the motorcycle
may cause injury to the rider, other road
users and pedestrians and may also cause
damage to the motorcycle.
With the key in the LOCK or P position the
steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is moving
as this will cause the steering to lock.
Locked steering will cause loss of
motorcycle control and an accident.
To Next Page
Loading...
