SWITCHES
AND CONTROLS
Turn
Signal
Control
(2)
The turn signal
lamps are controlled by a
lever
mounted on
the outboard side
of the steering column cowl.
Before making
a right-hand
turn, move the
lever
clockwise.
Move it anti-
cloc[wise
before
tuming left. When either left- or right-hand
turn signal
lamps are operating, a green indicator
light on the
facia,
flashes intermittently,
Clutch,
Brake and
Accelerator Pedals
(17,
18 and 19)
These are
conventional items which do
not
need
further
explanation.
Gear Shift
Lever
(24)
AU forward geals have synchromesh engagement. See
Fig. 6
for the gear shift positions.
Reverse is engaged by moving the
gear shift
lever to the right, lifting it and ther
moving it rearwards.
Handbrake Lever
(28)
To apply the
rear
wheel brakes, pull
the handbruke lever and
retain it in
position
by pressing the button on
top of the lever.
Release the handbrake by pulling
it slightly rearwards to free the
pawl, then
allow the lever to move forward
to the
"OFF"
position.
Seat
Adiustment
(Fig.
7)
The driver's
and passenger's seats are adjustable
for leg reach
by moving
the lever
at
the front of each seat and sliding
the
seat to
the desired
position,
allowing the
lever to re-engage in the
nearest adjustment notch. The passenger's
seat backrest hinges
forward to provide
access to the rear compartment.
Radio
Controls
For operating
instructions see the rudio leaflet provided
with
the set.
This is protected against electrical
damage by a
5 amp.
fuse housed in
the main lead union. See page 40-WARNING.
To Next Page
Loading...
