Triumph TR4A - Lighting and Indicator Lamps

ELECTRICAL
SYSTEM
Headlamp
Alignment
The sealed
beam
is aligned in
the
vertical
Plane
by
turoing the
screw
at the top
of the lamp
and
in the horizontal
Plane
by
turning
$e
screw on
the side.
Alignment
of the high
beam
on one
lamp is best
carried
out
with the other lamp
covered
Maximum
illumination
is obtained,
and
discornfort
to other
road users
is
Drevented,
bv
ensuring
that the lamp
beams
do
not
Droiect
above
lhe horizbntal
when the
vehicle iifuuy
laden.
Adjristrients,
when
necessary, should
be entrusted
to a Dealer
having
beam setting
equiPment.
Light
Unit
Replaceme
The headlamps
are
fitted
with sealed beam
units.
Fi
failure
necessitates
light unit
renewal.
Remove
the st
rim
by inserting
the
tool, provided
in the kit,
behind t
and
levering
sideways
(Fig.
57)
Remove the screl
Fig. 58, and
withdraw
the
rim to
release the
light unit. l
distub
the
beam aiming
adjustment
screws
(2).
Disc
the plug,
Fig. 59.
44
Fig.
5?
Fig. 5E
Fig.
59
Fig. 60