Triumph TR4A - De-Dust Rear Brake Linings; Generator

ROUTINE
SERVICING
.Fic.
29
Dedust
Rear Brake
Linhgs (Fig.
29)
Jack up the
rear of the car
and remove
both road wheels
and
brake druins.
Examine
the brake linings
for wear and
freedom
from oil or grease.
Renew
worn or contaminated
linings.
Using a
high pressure air
line, or a foot
Pump,
blow all
loose
dust from
the mechanism
and, using a clean
dry cloth,
wiPe the
dust
from the inside
of the drums. Avoid
touching the
braking
surfaces
with greasy
hands.
Refit the brake
drums and
road wheels,
rc-adiust the brakes
(see
page
20)
and
remove
the
jack.
Generator
(Fig.
31)
Use an oil can
to
pour
a few drops
of engine oil
through the
hole in the centre
of the rear end
caP.
Sparking Plugs
(Fig.
32)
Renew the sparking plugs.
Make sure
that new
Plugs
are of
the corect type and
that the gaps are set
to 0 025".
Re-connect
the plug
leads
as shown below.
Fig. 31
Fig. 32