Trivel.com | 11
1. Loosen the seat carrier clamp (B) using
a wrench until the saddle (A) can rotate
freely
2. Rotate the saddle (A) upward of downward
to the desired angle
3. Re-center the saddle (A) along the seat
beam (C) if it is unaligned
4. Tighten the seat carrier clamp (B) using a
wrench until the saddle (A) is locked tightly
into its new position.
The seat angle can be adjusted to your
personal preference whether you wish
for a straight, upright position or a more
relaxed, laid back seating position. You
should also consider adjusting the
backrest height and angle accordingly.
Set the seat angle by rotating the seat (A)
upward or downward along the seat
carrier clamp (B).
A
B
C
A. Seat
B. Seat carrier clamp
C. Seat beam
To Next Page
Loading...