Trivel.com | 23
How to shift gear efficiently
1. Avoid shifting gear when the chain is under
heavy tension. Reduce your pedalling power
briefly when changing gear.
2. Avoid accelerating on a high gear. Instead,
start off with a low gear and shift up
progressively to avoid putting too much
tension on the chain.
3. Avoid ‘’crossing the chain’’ by alternating rear
derailleur gear change and front derailleur
gear change.
4. Think of shifting down before coming to a
complete stop so you can start off again on
an easy gear and prevent premature wear to
the system.
If the chain suddenly drops from its
gear, stop pedalling immediately.
Carefully get it back on the gear
manually to avoid damaging the
frame and components.
The following gear combinations should
be avoided to prevent premature wear of
the transmission components :
Small chainring - Small sprocket
Large chainwheel - Large sprocket
RIDING IN WET CONDITION
Try to avoid riding in wet weather if
possible as this seriously increases the
risk of losing control and falling.
Tires contact with the ground and
braking efficiency is greatly reduced on
wet conditions. Slow down, start braking
early and more gently, take extra caution
when turning.
Water coming into your eyes can reduce
your vision field. Wear proper eyewear.
To Next Page
Loading...