10 | Trivel.com
A
B
C
A. Anti rotation screw
B. Quick release binder lever
C. Seat beam
Set seat position by moving the Seat
Beam (C) forward or backward along the
frame.
1. Loosen the seat beam anti rotation set
screw (A) using an Allen key
2. Pull the quick release binder lever (B) to its
open position to free the seat beam (C)
3. Adjust seat position to the desired distance
from the chainwheel
4. Push the quick release binder lever (B) back
to its closed position to lock the seat beam
(C) into the new position
5. Tighten the seat beam anti rotation set
screw (A) with the Allen key
SETTING THE SEAT POSITION AND ANGLE
The seat position is the principal setting
that can be adjusted to modify the user’s
position.
Moving it back or forth will change the
torso angle and leg extension when
pedalling so an optimal control and
pedalling efficiency can be obtained.
For a more active position, we
recommend that the seat be adjusted so
that the user has a slightly bent forward
torso angle as well as an approximate
knee angle of 25 degrees when the pedal
is at its farthest point when pedalling.
For a more relaxed position, the seat can
be moved forward, thus allowing less leg
extension and an upright or laid-back
torso angle.
To Next Page
Loading...