Trivel Azteca - Before Your First Ride; Before each Ride

Trivel.com | 7
BEFORE YOUR FIRST RIDE
Congratulations, you are about to experience a great feeling;
riding a Trivel! To ensure you have a pleasant first ride, please
make sure to follow these simple instructions:
1. Read or have someone read to you this manual’s Safety Warnings
and Riding Basics sections. Only until these sections have been fully
understood is it recommended to go for your first ride.
2. Adjust the seat, backrest, and handlebars to the recommended
position for you. See Adjusting your Trivel section to learn how.
3. Proceed to a safety check on the equipment. See Equipment Safety
check on the following chapter.
4. You’re good to go! Put your helmet on and enjoy the ride!
It is strongly recommended that you choose a private or
closed-circuit road without major inclines or heavy vehicles
get to know how your Trivel handles and how control
components such as the brakes and derailleurs feel.
BEFORE EACH RIDE
EQUIPMENT SAFETY CHECK
Proceed to the following Equipment safety check before going
for a ride.
1. Check components attachment
a. Check front wheel attachment by lifting the front end of your
Trivel and firmly hitting down on the top of the wheel. There
should be no movement of the wheel. Tighten the nuts or
quick-release binding system if the wheel moves or gets off
the fork. See the quick-release binder adjustment section for
instructions.
b. Check handlebars, seat, backrest and all other attachment
systems for unwanted movement. Tighten loose components
if needed.
See the Setting your position on your Trivel section
forinstructions.