Trivel Azteca - Turning the Power Assist System on; Choosing an Assistance Mode

38 | Trivel.com
TURNING THE POWER ASSIST SYSTEM ON
To activate the power assistance system,
press the
power button on the
controller. The LCD panel will light on and
show Assistance mode 0.
CHOOSING AN ASSISTANCE MODE
The LCD Panel unit shows which mode
you’re in. Use a power assistance
level according to the current riding
conditions. Use a higher assistance level
when going uphill or against a head
wind and switch to a lower assistance
level if you are riding on a flat road or
with a tail wind to save your battery.
Switch through power assist modes
using the
and buttons on the
controller.
Assistance mode: Use this mode
whenever you wish to benet from
electrical assistance, which makes
pedalling easier. Compared to
No-pedalling mode, this mode
gives you longer range for the same
charge.
MODE
POWER
KM/H
ODO
TRIP
KM
MODE
POWER
KM/H
ODO
TRIP
KM
MODE
POWER
KM/H
ODO
TRIP
KM



