To return to the Setup menu without saving the mix
calibration, press the
〈NO〉 key.
To save the mix calibration, press the 〈YES〉 key. The gauge
requests a mix calibration ID as shown:
Press the 〈ALPHA LOCK〉 key to enable the alphabetic keys on
the gauge. When the alphabetic keys are enabled, the symbol
A appears in the upper right of the display, as shown above.
Enter a unique mix calibration ID and press 〈ENTER/START〉.
The gauge displays:
The gauge can store the mix calibration in one of four
memory cells. Use the numeric keys to store the mix
calibration. Note that this will replace any mix calibration that
was previously stored in that cell.
The gauge enables the mix calibration, displays a brief
confirmation message, and returns to the Setup menu.
Disable the Mix Calibration
To disable the current mix calibration, press 〈6〉 at the mix
calibration menu. The gauge disables the mix calibration,
displays a brief confirmation message, and returns to the
Setup menu.
<ALPHA> f or Let t er s
Pr ess <ENTER>
1. Empt y 2. Empt y
3. Empt y 4. Empt y
Pr ess # To Sel ect
To Next Page
Loading...
