GDM-HST02 truemfg.com
TEC_TM_158 | REV. B | ENP#84066912/4/2023 Page 38 of 48
Maintenance & Servicing (cont.)
Maintenance Tasks Monthly Quarterly Annually
Verify the appliance maintains product temperature. X X X
Inspect power cord for damage; if damaged, replace immediately. X X X
Verify the power cord is fully plugged into the wall receptacle X
Inspect the overall condition of the appliance and its components
(such as castors, doors, and hinges).
X X X
Verify operation of all moving parts (such as fan motors, doors and
door cords).
X
Check battery backup system. X X
Check physical condition of all gaskets; verify gaskets seal correctly. X X
Inspect any lamps, lamp holder connections, LED modules, and LED
module connections.
X X X
Check all condenser coils (fronts and backs) for dust and debris; if
present, clear the debris.
X X X
Check physical condition of all condenser coils and evaporator coils;
straighten coil fins as needed.
X X
Check all evaporator coils for dust and debris; if present, clear the
debris.
X X
Verify the drain line is clear of debris. X X
Recommended Maintenance
See recommended maintenance tasks and frequencies below. Some tasks may be required more frequently based on your installation.
To Next Page
Loading...
Need help?
General
