Let’s Fly Spare part. Art. No. 0468N.
3. www.trustcare.se
Let’s Fly Service Manual. Revision version No: 2 – Aug 2017
Exchange of fender Let’s Fly.
1. Unscrew the double screw A and the two screws B
holding the fender.
2. Pull out the rear wheel mounting plate just enough
to free the fender.
3. Unscrew the wheel cap and remove the damaged
fender.
4. Screw the new fender and the wheel cap in place.
5. Turn the fender into correct position and tighten the
wheel cap screw..
6. Push the assembly into the rear leg and screw back
the screws A and B.
A
B
B
Fender
A
B
B
A
B
B