TrustCare Let’s Fly - Art. No. 0473 N

5. The wheel can be taken off and
replaced with a new one.
4. To replace the rear wheel, open
the retaining ring (snap-ring) with a
pliers.
6. Use the pliers to lock the new
snap-ring firmly into the groove on
the axle.
Let’s Fly Spare part. Art. No. 0473N.
Groove
4. www.trustcare.se
Let’s Fly Service Manual. Revision version No: 2 – Aug 2017
Exchange of rear wheel Let’s Fly.
A
B B
A
B B
1. Unscrew the double screw A and
the two screws B holding the fender.
2. Pull out the rear wheel mounting
plate just enough to free the fender.
3. Unscrew the wheel cap and
remove the fender.
A
B B
7. Screw the fender and the wheel
cap back in place.
8. Turn the fender in correct position
and tighten the wheel cap screw.
9. Screw back the screws A and B.