Let’s Fly Spare part. Art. No. 0476.
Let’s Fly Service Manual. Revision version No: 2 – Aug 2017
7. www.trustcare.se
1. Push the handle down to lowest
position.
2. Unscrew the double screw A and
the two screws B holding the fender.
3. Pull out the mounting plate with
the brake yoke from the rear leg.
6. push the whole assembly into the rear leg including
the fender.
7. Screw the double screw A and the two screws B
back in place.
Exchange of brake yoke.
4. Remove the damaged brake yoke and put in the
new one.
A
B B
Distance sleeve
5. Mount the yoke and distance sleeve and wire on the
wheel mounting plate.
A
B B