TSC Alpha-3R - Setting up the Connection

15
4.3 Setting up the Connection
4.3.1 Wired Connection
USB to USB Cable
1. Open the printer’s interface cover.
2. Insert the mini USB connector to the printer.
3. Insert the other end of the USB cable to your computer.
USB to RS-232 Cable
1. Open the printer’s interface cover.
2. Insert the mini USB connector to the printer.
3. Insert the RS-232 connector to your computer.
4.3.2 Connection via Bluetooth (optional)
Default
Name
RF-BHS
PIN
0000
Refer to the section “Setting up Bluetooth” to configure Bluetooth
for the printer.