34
This option is used to set the RS-232 parity. The default setting is None. Press
button under ª and © to select the different parity, and press button
under “V” to set the value into printer. When you enter this list, the parity in the
right side of ¨ is the printer current setting.
4.1.3.3 Data Bits:
This option is used to set the RS-232 Data Bits, and the default setting is 8.
Press button under ª and © icon to select the different Data Bits, and
press button under “V” icon to set the value into printer. When you enter
this list, the Data Bits in the right side of ¨ icon is the printer current setting.
4.1.3.4 Stop Bits:
This option is used to set the RS-232 Stop Bits. The default setting is 1. Press
button under ª and © icon to select the different Stop Bits, and press
button under “V” icon to set the value into printer. When you enter this list, the
option in the right side of ¨ icon is the printer current setting.
¨8 Data Bits
Exit
ª © V
One Stop Bit
¨Two Stop Bits
ª © V
To Next Page
Loading...
