To Next Page

To Previous Page

5. TSC Console

TSC Console is a management tool combining the Printer Management, Diagnostic Tool, CommTool and Printer Webpage settings,

which enables you to adjust printer’s settings/status; change printers’ settings; download graphics, deploy fonts, graphics, label

templates or upgrade the firmware to the group of printers, and send additional commands to printers at the same time.

※ Printer firmware version before A2.12 will only use 9100 Port as command port; Printer firmware after A2.12 will use

6101 Port as command port.

5.1 Start TSC Console

1. Double click TSC Console icon to start the software.

2. Manually add the devices by clicking Printer > Add Printers.

Questions and Answers:

Need help?

Do you have a question about the TSC Prontronix TTP-244CE and is the answer not in the manual?

TSC Prontronix TTP-244CE Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Print Length	90 inches
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB
Maximum Print Length	90 inches
Communication Interface	USB 2.0, RS-232
Label Width	1.18" - 4.33" (30 - 110 mm)
Label Thickness	0.003 - 0.008" (0.08 - 0.2 mm)
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25-85% non-condensing
Dimensions	232 mm x 156 mm x 288 mm