EasyManuals Logo

TSC Prontronix TTP-244CE User Manual

TSC Prontronix TTP-244CE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
28
8. Angency Compliance and Approvals
EN 55032, Class B
EN 55024
EN 60950-1; EN 61000-3-2; EN 61000-3-3
FCC part 15B, Class B
ICES-003, Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conform à la norme NMB-003 du Canada.
AS/NZS CISPR 32, Class B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC Prontronix TTP-244CE and is the answer not in the manual?

TSC Prontronix TTP-244CE Specifications

General IconGeneral
Resolution203 dpi
Print Speed4 ips
Print MethodThermal Transfer / Direct Thermal
Print Length90 inches
Memory8 MB SDRAM, 4 MB Flash
InterfaceUSB
Maximum Print Length90 inches
Communication InterfaceUSB 2.0, RS-232
Label Width1.18" - 4.33" (30 - 110 mm)
Label Thickness0.003 - 0.008" (0.08 - 0.2 mm)
Power SupplyAC 100-240V, 50/60Hz
Operating Temperature5°C to 40°C
Storage Temperature-40°C to 60°C
Humidity25-85% non-condensing
Dimensions232 mm x 156 mm x 288 mm

Related product manuals