TSC TTP-243 Series Programming Manual

TSC AUTO ID Technology Co., Ltd. 23 Copyright 2009 All Rights Reserved.
 FEED
Description
This command feeds label with the specified length. The length is specified by dot.
Syntax
FEED n
Parameter Description
n unit: dot
1 ≤ n ≤ 9999
Note: 200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
Example
FEED 40
See Also
BACKFEED, SIZE, GAP, BLINE, HOME, FORMFEED

TSC TTP-243 Series Specifications

General

Brand	TSC
Model	TTP-243 Series
Category	Barcode Reader
Language	English