TSC TTP-343 Plus - User Manual

USER’S
MANUAL
TTP-245 Plus / TTP-343 Plus
TTP-247 / TTP-345
THERMAL TRANSFER / DIRECT THERMAL
BAR CODE PRINTER

Summary

Introduction and Getting Started

Initial Setup Overview

Steps for unpacking, inspection, and basic setup of the printer.

Printer Setup Procedures

Printer Setup and Connection

Step-by-step guide for connecting and configuring the printer.

Loading Ribbon and Labels

Instructions for properly installing printer ribbon and label stock.

Optional Module Installation

Procedures for installing peel-off and cutter modules.

Memory Card Installation

Guide for installing an SD memory card into the printer.

Diagnostic and Network Setup

Using the Diagnostic Tool

Guide on launching and utilizing the printer's diagnostic utility software.

Ethernet Configuration

Steps for setting up network connectivity via USB, RS-232, or Ethernet.

Power-on Utilities

Sensor Calibration and Tests

Procedures for sensor calibration, self-tests, and dump mode entry.

Printer Initialization and Control

Steps for printer initialization, sensor mode configuration, and AUTO.BAS control.

Maintenance and Troubleshooting

Printer Cleaning and Maintenance

Methods and materials for cleaning and maintaining the printer.

Troubleshooting Printer Issues

Guide to resolving common printer problems using LED status and print quality checks.

LED and Button Operations

Explanations of printer status indicators and control buttons.

TSC TTP-343 Plus Specifications

General

Brand	TSC
Model	TTP-343 Plus
Category	Printer
Language	English