TSI Incorporated 8710 DP-CALC User Manual

5
Chapter 2. Unpacking and Setting Up
This chapter describes unpacking and setting up (preparing) the micromanometer for use. Figure 3 shows
a picture of the Model 8710 with a velocity matrix measuring the face velocity on a laboratory hood.
Figure 3: Model 8710 with Velocity Matrix
Unpacking
As you unpack the instrument and accessories, check the components against your packing list. If any
parts are missing or damaged, notify us immediately. Tables 1 and 2 list available standard and optional
components.
Table 1: List of Standard and Optional Components
Item Part No./Model No.
TSI Model 8710 DP-CALC Micromanometer 8710-XXX
TSI Model 8375 ACCUBALANCE
®
Modular Air Balancing Tool with North
American AC Adapter
TSI Model 8375 A
CCUBALANCE
®
Modular Air Balancing Tool with multi-
Country AC Adapter
8375
8375M
Carrying case 1319378
Carrying case, wheeled hood kit, Model 8375 1319379
AA-size NiMH battery, four required 1208048
Operation and Service Manual 1980495
Velocity Matrix Add On Kit 801090
Air Flow Probe 800187
Printer, Serial (U.S.A. and Canada) Contact TSI
12 in. (30 cm) Pitot Probe 634634000
18 in. (46 cm) Pitot Probe 634634001
24 in. (61 cm) Pitot Probe 634634002
36 in. (91 cm) Pitot Probe 634634003
60 in. (152 cm) Pitot Probe 634634005
Temperature Probe 800218
Temperature and Humidity Probe 800219
Battery Charger, includes 4 NiMH batteries 801093

TSI Incorporated 8710 DP-CALC Specifications

General

Brand	TSI Incorporated
Model	8710 DP-CALC
Category	Measuring Instruments
Language	English