24 Model 8710 DP-CALC
TM
Micromanometer and Model 8375 ACCUBALANCE
®
Air Balancing Tool
6. Press S or T to change device.
7. Press
. COM.DEV is displayed.
8. Press ESC to return to SETUP.
Set the Baud Rate
Before transferring data to a computer or printer, you must set the baud rate to the speed at which your
printer or computer will accept information.
1. Press
to display CHANGE Test ID.
2. Press X until SETUP appears.
3. Press
.
4. Press X until BAUD appears.
5. Press
. The display shows the currently selected baud rate.
6. Press S or T to change the baud rate. Options are: 19200, 9600, 4800, 2400, and 1200.
7. Press
. BAUD is displayed.
8. Press ESC to return to SETUP.
Set the Format for Date and Decimal
The Format option lets you set the format for the date (mm/dd or dd/mm) and also for the delimiter (. or ,)
the instrument uses.
1. Press
to display CHANGE.
2. Press X until SETUP appears.
3. Press
.
4. Press X until FORMAT appears.
5. Press
. The currently selected format appears.
6. Press S or T to change the format. Options are:
Peri nndd (use a period for the delimiter and show date as month/day)
Peri ddnn (use a period for the delimiter and show date as day/month)
Conn nndd (use a comma for the delimiter and show date as month/day)
Conn ddnn. (use a comma for the delimiter and show date as day/month)
7. Press
to select the new format. FORMAT is displayed.
8. Press ESC to return to SETUP.
To Next Page
Loading...
