To Next Page

To Previous Page

2-2 Model 3936 Scanning Mobility Particle Sizer

(SMPS

) Spectrometer

Table 2-2 gives a packing list for the SMPS™ Accessory Kit

(1035989), which includes all the necessary cabling and tubing to

configure the SMPS

™ spectrometer. Table 2-3 gives a packing list

for the Inlet Impactor.

Table 2-2

Model 1035989 SMPS™ Accessory Kit

Qty Description Part Number

1 Coaxial cable 101144

1 Fitting adapter assembly 1035992

1 Flow equalizer assembly 1036014

1 Inlet filter assembly 1036015

1 Vacuum grease 5-gram container 1701000

1 SMPS operation and service manual 1933796

Table 2-3

Model 1035900 Inlet Impactor Packing List

Qty Description Part Number

1 Impactor, including: 1030669

1 0.0457 cm diameter nozzle 390150

1 0.0508 cm diameter nozzle 390160

1 0.071 cm diameter nozzle 390170

Unpacking Instructions

Individual instruments in the system come fully assembled with

protective coverings on the inlets and electrical connections. To

avoid contaminating the instrument or the environment the

instruments are monitoring, do not remove the protective covers

until you are ready to install the instruments.

If anything is missing or appears to be damaged, contact your TSI

representative, or contact TSI at 1-800-874-2811 (USA) or 001-

(651) 490-2811. Chapter 6, “Service

,” gives instructions for

returning the SMPS spectrometer to TSI Incorporated.

TSI Instruments 3936 User Manual

Questions and Answers: