2-6 AEROTRAK™ Portable Airborne Particle Counter
To Use AC Power
Connect the country-appropriate power cord to the external power
supply. Next connect the 24 VDC connector to the socket in the
particle counter and then connect the other end to an AC outlet.
WARNING
The instrument turns on automatically when the AC power supply is
plugged in.
Using the Stylus
This particle counter is shipped with a plastic stylus for use with
the touch screen interface. Use your fingertip or the stylus only.
Do not use sharp objects, such as pens or pencils on the touch
screen as they may damage it.
Power
Entry
To Next Page
Loading...
