3-6 AEROTRAK™ Portable Airborne Particle Counter
Setup Tab
The setup tab provides access to the following:
Sampling Setup Set up Particle Channels, Sample Timing, Particle
Channel Alarms, Sample Count Mode, Count Units,
and Environment display settings.
Locations Setup Identify and save the location information
associated with collected samples.
Recipe Setup Save a group of settings (a recipe) that you use
over and over so you don’t have to reset individual
settings.
System Setup Change Power On Password, Setup Password,
System Configuration, Print Settings, Print Schedule
and Clear Samples
Device Setup Set Date and Time, Screen Alignment,
Communications, Regional Settings, and get device
information.
To Next Page
Loading...
