Maintenance 5-3
4. Orient the wide part of the swab parallel with the back of the
unit and clean the entire interior of the inlet nozzle while unit
is sampling. Note: The unit’s blower will slow down or stop
while inlet is being cleaned.
WARNING
Do not attempt to use a cleaning swab without the swab handle. An
improperly applied swab could get caught or stuck causing damage and
contamination.
5. Discard the used swab and repeat the cleaning process with
two (2) more clean swabs.
Cleaning the Instrument Enclosure
To clean the enclosure, dampen a lint-free cloth and gently wipe
the surface until surface contamination is removed.
To Next Page
Loading...
