TSI Instruments dusttrak II 8530 User Manual

11
Chapter 2
Setting Up
Supplying Power to the DustTrak II Aerosol Monitor
The DustTrak II Aerosol Monitor must be powered by either batteries or using
the external AC adapter.
W A R N I N G
The instrument has been design to be used with batteries
supplied by TSI. DO NOT use a substitute.
Disposing of old batteries must be recycled in accordance
with the local environmental regulations.
W A R N I N G
DO NOT use non-rechargeable batteries in this instrument.
Fire, explosions, or other hazards may result.
Installing the Batteries in Model 8530/8530EP Desktop
Remove the battery cover and slide one or two batteries into the battery slots.
A single battery can be put into either slot. Orient the batteries with the label
side facing up (see Figure 2-1).
Figure 2-1: Batteries into Desktop Unit

TSI Instruments dusttrak II 8530 Specifications

General

Brand	TSI Instruments
Model	dusttrak II 8530
Category	Measuring Instruments
Language	English