TSI Instruments dusttrak II 8530 - Page 44

Chapter 3
34
Background
Switches between blue and white backgrounds.
Touch Cal
Calibrates the touch cal screen.
IP
USB PORT IP Address:
USB IP is the address assigned to the instrument by
the NDIS driver. It is shown but cannot be changed.
Ethernet Port IP parameters:
(Model 8530 Desktop only.)
IP method can be set to static or dynamic.
For static IP, IP address, default gateway, and subnet
mask can be set.
For Dynamic, The IP assigned by the network is
shown. This cannot be changed.
See Note below.