TTC PCM30U - Recommended Wires and Tools for Connector XC201

PCM30U, PCM30U-OCH – User's, Operating and Maintenance Manual
E.1.13 Recommended wires and tools for connector XC201
Connector with crimp contacts
e
c
a
32
2
Wire diameter for crimping into FC3 0,5 – 1,5 mm² (20-16 AWG)
Outer diameter of insulation 1,6 - 2,8 mm
Insulation stripping length 3,5 to 4 mm
3,5-4
Removal tool TTC 1900274
Connector with grub screws contacts (32 screws)
e
c
a
32 2
Recommended wire diameter (1 wire or cable) 0,22 – 2,5 mm² (24-14 AWG)
Insulation stripping length 8 mm ± 0,5 mm
8±0,5
Recommended screwdriver 3,5×0,5 mm
Recommended tightening torque 0,6 Nm
Power Channel Modules E-26 446S037.914.14N00